5/8 Double Expansion Anchor Zamac Alloy (Pack Qty 25) BC-62AED by Korpek

PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM. Product dimensions, finish, head markings, thread length, stamping shape or forging shape, etc., may differ from picture. Products are guaranteed to meet the specifications to which they are manufactured. Specifications allow for tolerances in dimension and shape, which can vary from lot to lot. Anchors should be installed a minimum of ten anchor diameters between each other and a minimum of five anchor diameters from the edge. Should be equal to or slightly longer than the length of the anchor. Used in soft masonry with machine screws or machine bolts which are exposed to vibration or side pressure. As the anchor sets, the opposite ends pull towards each other causing the elongation of the anchor body. It doesn't fracture and allows for a fastening of any length. Can also be used in harder materials, including stone, brick, concrete or block. Machine Pack Count - Margin error of +/- 5%

• Anchors should be installed a minimum of ten anchor diameters between each other and a minimum of five anchor diameters from the edge
• Should be equal to or slightly longer than the length of the anchor
• Used in soft masonry with machine screws or machine bolts which are exposed to vibration or side pressure. As the anchor sets, the opposite ends pull towards each other causing the elongation of the anchor body. It doesn't fracture and allows for a fasten