Arrival! 2.2kw Water Cooled ATC Motor 220v Rotating spdeed 24000rpm 4 Pole 800Hz Blind rivet IS020-15°(380v,24000rpm)

Engine Radiator Cooling Fan Motor1 & 220v 22kw Water cooled ATC ceramic ball bearings ModelGDL802024Z22Voltage:220vPower:2.2kwCurrent: 7.6AFrequency:800HzRotating speed:24000rpm/30000rpmPole number: 4PPhase number:3Weight(kg):8KGBlind rivet:IS020-15° (Parfaite is recommended)Tool holder:IS020 (Parfaite is recommended)Rotating direction: Rotate anticlockwise from the shaft extension end1.The electric main shaft shall be installed at the clamped position; otherwise the bearing will be easily damaged! 2. The main shaft shall entirely stop before the tool changing. The manual tool changing button shall not act during the rotation of the shaft; otherwise it will easily result in the seizure of the shaft!3. The compressed air shall be clean and dry, and the filter accuracy shall be 0.1 ! Air seal is normally open. It is recommended to use the two-level filter, and the filter accuracy is 0.5 micron/0.1 respectively. The air filter is installed with the self-discharge device.1: Power line Three-color lines connected with U.V.W phases/yellow and green wires grounded. Temperature controlline 110 therminstor two- phase connected with the temperature-control protector.2: Cooling water feed Pump lift 8m3:Pole change and dust removal pressure 0.2-0, 3Mpa (6/4 hoses)4: Quantity of proximity switchesPole hanging and pole discharge NPN (normally open)N.O. Wiring method of the proximity switch Brown wire connected with +24VDC/the other end connected with the balck wire.5: Air seal pressure0.1-0.2Mpa (4/2 hoses)6: Cooling water yielding (2 and 6 ends terminated with 8/6 hoses)7: Air inlet pressure of the cylinder 0.65Mpa (6/4 hoses)1. Our Ceramic ball bearings use 4 pcs ceramic ball bearings.2. Ceramic ball bearings are to high temperatures and low heat, usually 3-5 degrees lower than steel ball bearings during using .3. Ceramic ball bearings have low f

• Engine Radiator Cooling Fan Motor
• Arrival! 2.2kw Water Cooled ATC Motor 220v Rotating spdeed 24000rpm 4 Pole 800Hz Blind rivet IS020-15°